Blog

How to Set Up a Solar Generator to Decrease Carbon Emissions

Lessening greenhouse gases is what the planet needs right now. With power production being a major contributor to pollution, it’s not surprising that the demand for alternative methods is continuously rising.

Purchasing solar generators can cost you a lot of money, so the best alternative is a DIY solar generator. The technology has already existed for ten to fifteen years, and some families and environmental enthusiasts have already adapted to solar power as their primary source for reducing carbon emissions.

In fact, approximately 40% of homeowners would want to have a power source backup such as a solar generator.

Benefits of Solar Generator

Although building a solar generator can be challenging, having one has a lot of benefits. For one, solar generators allow you to power anything inside your house without worrying about paying expensive electric bills, which can also save you a lot of money.

Electric power is essential in peoples’ lives, so running out of it can be frustrating. Having a solar generator can make your life convenient and the environment sustainable. With only batteries, some materials, and the sun’s power, you can access power from a renewable source of energy.

Materials Needed

Setting up a solar generator on your own will not cost you more as long as you know the process and the materials needed. Here are the things you need:

  • Solar Panels – These are the ones responsible for collecting power energy from sunlight.
  • Batteries – You’ll need several batteries that are specifically designed for solar panels.
  • Storage Device of the Batteries – This is to keep the batteries protected.
  • Mounting Stand
  • Charge Controller – This contains both positive and negative leads.
  • Power Inverter – You’ll need it when powering and charging devices.

Setting Up Your Solar Generator

Here are the steps you should follow to build your own solar generator:

  1. Organize the panel. Choose a place with direct sunlight without any obstruction, such as the roof or backyard.
  2. Set up the mounting stand. You can choose whether to make a DIY stand or purchase one. Any will do as long as you can stand the panel so that it can receive the most sunlight.
  3. Start by putting the stand, making sure that it’s facing south. Also, make sure to mark the leg position.
  4. Make the concrete. Mix cement, gravel, and water to make it thick. Pour the mixture on each leg stand. It is better to make the concrete thicker to make a stronger foundation.
  5. Set up the panels to the leg stand. The panel’s backside has holes to place them correctly.
  6. The solar panel’s back part has a junction box. Check for positive and negative leads for wiring.
  7. The next step is to connect it to external wires. It is best to compute the capacity of your battery and solar panel’s rating.
  8. To proceed with appliance wiring, you need to connect a device’s positive lead to another device’s negative lead.
  9. For parallel connection, the first device’s positive terminal needs to be connected to the second device’s positive lead, and the same goes with the negative terminal of both devices.
  10. Afterward, create a hole at the back part of the power inverter to suction out the fresh air from outside.
  11. Place the charge controller on the side of the inverter stand.
  12. Wire the charge controller with 3 signs.
  13. Once you find the different signs, you can then wire them up. It is essential to always follow the package insert of your charge controller. The black wire is for negative and the red one is for positive, connecting the charge controller to your battery bank.
  14. After connecting it, you must see the indicator blinking or light up, which means you are on the right track.
  15. You can now connect the controller to the solar panel. Look for the junction box and connect two wires with negative and positive signs.
  16. Get an MC4 connector to pair the wires to the controller. Then, the light will go green from the controller once sunlight is present.

Conclusion

Solar generators can indeed be costly, but it is still possible to set up generators from solar power by yourself in a more affordable manner. All you need are the materials needed and the steps to follow.

Just keep in mind that going solar is an excellent decision as it is practical and can help save the planet by reducing carbon emissions.

Leave a Reply